Suitable for KTM Twin Shock Moto Cross, Enduro, 250, 400, 420,495, possibly also suitable for other brands, Maico, Puch, Husqvarna, etc.Set of Öhlins shock absorbers- good used condition, may need to be overhauled- Length of the struts from center eye to center eye 420 mm- Eye hole 9 mm- The rubbers in the eye
Suitable for KTM GS 125 - 500 Front wheel complete with brake disc, speedometer drive and extension axle - DID 1.6-21 - 12/97 DOT - Tires 3.00-21 - needed - very good condition - no cracks on the rim - Brake disc diameter 260 mm (see pictures)
Felge Vorderrad Aluminium N 19 MT 2.15 578 DOT | Honda CB 750 FZ, KZ, CB 900 KZ Die Felge ist in gutem gebrauchten Zustand, hat keine Risse, lediglich etwas Gebrauchsspuren am Felgenrand (siehe Bilder). Die Teil.-Nr. der Felge lautet: 44650-422-305 Die Felge hat einen gemessenen Schlag von 2mm.
BGM Schläuche sind nach Vorgaben, speziell für die Bedürfnisse
von Vespa und Lambretta Roller gefertigt. Der Butylgehalt liegt bei über
55%, das macht sie extrem Luftdicht und absolut zuverlässig. Der hohe
Butylanteil macht den Schlauch zwar teuer in der Herstellung, das
Ergebnis rechtfertigt aber den Aufwand. Die Ventile
sind in modellspezifischer Position einvulkanisiert. TIP : Die BGM
Vespa Schläuche sind in vielen anderen Fahrzeuge mit zehn Zoll
Schlauchreifen verwendbar. Bei der Montage die Reifen am Wulst mit
Montagepaste einsetzen und das Reifeninnere mit Talkum bestäuben. Die
Montagepaste sorgt für die richtige Endposition des Reifens während das
Talkum die Reibung des Schlauches minimiert. So wird die Sicherheit und
Lebensdauer des Schlauches maximiert. HINWEIS : Schläuche mit einem
geringeren Butylgehalt verfügen durch einen größeren Gummianteil über
mehr Flexibilität. Sie bedienen damit ein größeres Spektrum an möglichen
Reifengrößen (bis zu 130/90-10). Als großer Nachteil muss eine
schlechte Luftdichtigkeit in Kauf genommen werden.
Suitable for KTM GS 125 - 500 Front wheel complete with brake disc, speedometer drive and extension axle - DID 1.6-21 - 12/97 DOT - Tires 3.00-21 - needed - very good condition - no cracks on the rim - Brake disc diameter 260 mm (see pictures)
Suitable for Vespa 50 S/SR/Sprint, 50 N/L/R, conversion rim 9" to 10"Complete wheel 3.50-10 with tires- Michelin S1- Used condition with slight traces of corrosion on the rim- with patina
Suitable for Vespa 50 S/SR/Sprint, 50 N/L/R, conversion rim 9" to 10"Complete wheel 3.50-10 with tires Michelin S1- Used condition with slight traces of corrosion on the rim- with patina
Suitable for KTM Twin Shock 125-495Rear wheel complete with brake carriers- SUN Metal- 798004 B- DOT 2156 18- 2.15-18, tires 4.00-18- good condition - no cracks - Axle diameter 17 mm - Chain wheel support flat (see pictures)
Suitable for MAICO 250/400/440Rear wheel complete with brake carrier and rear axle AKRONT WM 3- 2.15-18-36-TC - 11/77 - E-DOT - tires 130/90-18 - good condition - no cracks - different rim - with chain wheel (see pictures)
Suitable for MAICO 250/400/440Front wheel complete with brake carrier and extension axle (fixed) - AKRONT WM 1 - 1.6-21-36-TC - 2/78 - E-DOT - Tires 3.00-21 - needed - no cracks on the rim (see pictures)
Suitable for Piaggio Vespa 50/ Special/ PK 50-125, Vespa 50/ N(D)/ L (D)/ R (D)/ SR (D)/ Special/ SS/ 90/ R/ 100/ 125/ PV/ ET3/ PK50-125/ S/ XL/ XL2SIP complete wheel (new) - with bronze-painted Divideo 2.10-10 rim and SIÜ 3.00-10 classic tires - with hose Note: Due to an assembly error, the hose valve is not located completely centrally (see picture). However, the function is not restricted.
Suitable for PK 50-125 /S /SS / XL /XL2/Automatic / Primavera 125 - 150 cc / SprintShock absorber, suspension strut for PK 50-125 /S /SS / XL /XL2/Automatic / Primavera 125 - 150 cc / Sprint - Part no. 76005FBB - in front - from warehouse clearance - as new - with ABEKBA 91475 - for racing purposes only - Length 185mm - black Note: Also suitable for converting to disc brakes for Vespa 50-1254/PV/ET3/VNA/VNB/150